User's Manual
Table Of Contents
- WatchGuard® Firebox® X Edge User Guide
- Certifications and Notices
- Declaration of Conformity
- Notice to Users
- WatchGuard Firebox Software
- End-User License Agreement
- Copyright, Trademark, and Patent Information
- Limited Hardware Warranty
- Abbreviations Used in this Guide
- CHAPTER 1 Introduction to Network Security
- CHAPTER 2 Installing the Firebox® X Edge
- CHAPTER 3 Configuration and Management Basics
- CHAPTER 4 Changing Your Network Settings
- Using the Network Setup Wizard
- Configuring the External Network
- Configuring the Trusted Network
- Configuring the Optional Network
- Enabling the optional network
- Changing the IP address of the optional network
- Using DHCP on the optional network
- Setting optional network DHCP address reservations
- Configuring the optional network for DHCP relay
- Using static IP addresses for optional computers
- Adding computers to the optional network
- Requiring encrypted connections
- Making Static Routes
- Viewing Network Statistics
- Registering with the Dynamic DNS Service
- Enabling the WAN Failover Option
- Enabling External Modem Failover
- CHAPTER 5 Setting up the Firebox X Edge Wireless
- CHAPTER 6 Configuring Firewall Settings
- CHAPTER 7 Configuring Logging
- CHAPTER 8 Configuring WebBlocker
- CHAPTER 9 Configuring Virtual Private Networks
- CHAPTER 10 Configuring the MUVPN Client
- CHAPTER 11 Managing the Firebox® X Edge
- Viewing Current Sessions and Users
- About User Authentication
- Adding or Editing a User Account
- About Seat Licenses
- Selecting HTTP or HTTPS for Firebox Management
- Changing the HTTP Server Port
- Setting up VPN Manager Access
- Updating the Firmware
- Activating Upgrade Options
- Enabling the Model Upgrade Option
- Configuring Additional Options
- Viewing the Configuration File
- APPENDIX A Firebox®X Edge Hardware
- Index
Configuring the Trusted Network
User Guide 51
Changing the IP address of the trusted network
If necessary, you can change the trusted network address. For exam-
ple, if you connect two or more Firebox devices in a virtual private
network, each Firebox must use a different trusted network address.
For more information, see “What You Need to Create a VPN” on
page 107.
To change the IP address of the trusted network:
1 To connect to the System Status page, type the IP address of
the trusted network in the browser.
The default IP address is: https://192.168.111.1
2 From the navigation bar, select Network > Trusted.
The Trusted Network Configuration page appears.
3 Type the first address of the new network address range in the
IP Address text field.
4 If necessary, type the new subnet mask.
Most networks use 255.255.255.0 which includes 252 addresses.
Using DHCP on the trusted network
The DHCP Server option sets the Firebox X Edge to give IP addresses
to the computers on the trusted network. When the Firebox receives
a DHCP request from a computer on the trusted network, it gives
the computer an IP address. A factory default Firebox has the DHCP
Server option for the trusted interface on.