- WatchGuard SOHO User Guide SOHO and SOHO|tc 2.3

Default factory settings
24
• Public network settings use DHCP
NOTE
DHCP must be enabled for you to be able to access the SOHO device when
it boots up.
Private Network
• Private network IP address: 192.168.111.1.
• All computers on the private network automatically receive
their addresses using dynamic DHCP.
• Ten seat license–Ten computers have access to the Internet
through the SOHO. Remember, while only four devices
connect directly to the LAN ports (numbered 1-4), one or
more of these devices can be a hub or router. Please see,
“Cabling the SOHO for more than four computers” on
page 8