- WatchGuard SOHO User Guide SOHO and SOHO|tc 2.3

User Guide 2.3 41
Blocking outgoing services
2 Select Services.
The Services menu appears.
3 Select Blocked Outgoing Services.
The Blocked Outgoing Services Menu appears. In addition, a list of
blocked outgoing services is displayed beneath the menu identified by
protocol and port number.
4Click Block TCP or UDP Service.
The Block TCP or UDP Service menu appears.
5 Use the drop list to select a protocol type: TCP or UDP.
6In the From Port field, enter the first port number to block. To
block a single port, re-enter the port number in the To Port
field. To block a range of port numbers, enter the last number
in the range in the To Port field.
7Click Submit.
The configuration change is saved to the SOHO, and the Blocked Service
List page appears. The outgoing service is identified by protocol and port
number range.
Blocking an alternative protocol
While less common, there are a number of other Internet protocols
you may choose to block by name. The WatchGuard SOHO
currently only allows you to block non-TCP/UDP protocol on all
ports.
1 Using your Web browser, go to http://192.168.111.1.
2 Select Services.
The Services menu appears.
3Click Blocked Outgoing Services.
The Block Protocol page appears.
4Click Block IP Protocol.
5 Enter the name of the protocol.
For example, IP.