Product Info

Using the HiFi Microphone
Using the HiFi Microphone
You use the HiFi Mic throughout your shift to help your 4RE DVR collect
quality audio evidence.
Beginning a shift
1. Remove the transmitter (mic) from the base and power it on (see Power
switch on page 25).
2. Verify whether the mic is synchronized with the base in your vehicle (see
Status icons on page 27).
3. If needed, sync the mic with the base (see Synchronizing the
Transmitter and the Base on page 29).
During a shift
4. As needed, trigger a recorded event from the transmitter (mic) (see
Talk/Mute slide button on page 22).
5. As needed, mute the transmitted audio from the mic (see Talk/Mute slide
button on page 22).
6. As needed, change the notification mode of the mic (see Mode button on
page 23).
7. As needed, activate the mic's Covert mode (see Mode button on page
23).
Ending a shift
8. Power off the transmitter (mic) (see Power switch on page 25).
Note: WatchGuard recommends that you power
off the mic before you put it in the base to
charge, but this step is not required.
9. Place the mic in the base to charge (see Charging the Transmitter on
page 30).
WGD00091
Revision ReviewDraft_
052720
17