Product Info

Status LEDs
Status LEDs
The HiFi Mic has status LEDs on both the base
and the transmitter (mic). You can use these
LEDs in conjunction with the icons on the
display to determine the status of the HiFi Mic.
On the base, the status LEDs are on the front,
just under the WatchGuard shield symbol.
The LEDs on the base can help indicate the
status of certain functions of the HiFi Mic:
l Synchronizing: As the base syncs
with the mic, both the red and green
LEDs flash. Once the base and mic are
synced, either the green LED turns on
or the red LED starts flashing,
depending on whether the mic is fully charged or begins to charge. For
information about synchronizing the mic with the base, see
Synchronizing the Transmitter and the Base on page 29.
l Charging: The red LED flashes while the mic is charging. When the
mic's battery is fully charged, the red LED turns off and the green LED
turns on. For information about charging the mic in the base, see
Charging the Transmitter on page 30.
l Normal operation: When the base and mic are on and functioning
normally, but not transmitting audio to be recorded, the green LED is on.
l Recording: When the audio transmitted from the mic is being recorded,
the green LED is on. For information about triggering a recorded event
from the HiFi Mic, see Talk/Mute slide button on page 22.
l Muted: When the mic is muted, the green LED flashes. For information
about muting the HiFi Mic, see Talk/Mute slide button on page 22.
l Turned off: When the mic is turned off and not in the base, the red LED
flashes.
l Covert mode: When the mic is in Covert mode, the LEDs on the base
behave normally. Covert mode does not change the LED behavior on the
base. For information on using the HiFi Mic in Covert mode, see Mode
button on page 23.
l Lost connection/out of range: If the base loses connection to or is out
of range of the mic, the red LED flashes until the connection is
reestablished.
For information on the status LEDs on the mic, see Status LEDs on page
24; for information on the icons on the display, see Display on page 26.
WGD00091
Revision ReviewDraft_
052720
19