Product Info
Table Of Contents
- VISTA HD Wearable Camera User Guide
- Important Notice
- Contents
- Introduction
- Using the VISTA Body Camera
- Overview
- Wearing VISTA and VISTA WiFi
- Wearing VISTA XLT
- Powering On and Off
- Starting and Stopping a Recorded Event
- Muting the Audio During a Recorded Event
- Categorizing a Recorded Event
- Docking the VISTA Body Camera
- About the VISTA Body Camera
- VISTA Body Camera Special Features
- Using VISTA WiFi or VISTA XLT with a Recording Group
- Appendix A: Using VISTA SmartConnect
- Appendix B: Using the QuickConnect Mobile Charger
- Appendix C: Upgrading VISTA, VISTA WiFi, and VISTA-Related Devices
- Appendix D: VISTA Transfer Station Setup
- Index
Appendix B: Using the QuickConnect Mobile Charger
Note: WatchGuard supports the US-type 12 V cigarette-lighter plug.
Cable connection end
The cable has magnets that align with the bottom of the QuickConnect mobile charger. They
are strong enough that they will not fall off of the base if you are moving around in the car or a
short distance from the car. They pull away easily from the base when you want to exit the car.
The charger works with the cable in any attachment orientation.
12 V cigarette-lighter plug
Some cigarette-lighter receptacles do not hold the plug tightly. You can use the clip (part
number WGP760-100) and screw (part number WGP635-002) to secure the cable to the
console as shown in the graphic. This prevents the cigarette-lighter plug from pulling out of the
receptacle when you pull on the cable. The clip and screw are shipped with the QuickConnect
mobile charger.
124
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
Draft