Product Info
Table Of Contents
- VISTA HD Wearable Camera User Guide
- Important Notice
- Contents
- Introduction
- Using the VISTA Body Camera
- Overview
- Wearing VISTA and VISTA WiFi
- Wearing VISTA XLT
- Powering On and Off
- Starting and Stopping a Recorded Event
- Muting the Audio During a Recorded Event
- Categorizing a Recorded Event
- Docking the VISTA Body Camera
- About the VISTA Body Camera
- VISTA Body Camera Special Features
- Using VISTA WiFi or VISTA XLT with a Recording Group
- Appendix A: Using VISTA SmartConnect
- Appendix B: Using the QuickConnect Mobile Charger
- Appendix C: Upgrading VISTA, VISTA WiFi, and VISTA-Related Devices
- Appendix D: VISTA Transfer Station Setup
- Index
Appendix C: Upgrading VISTA, VISTAWiFi, and VISTA-Related Devices
Upgrading VISTA or VISTA WiFi to Firmware Version
2.2.0
Warning! VISTA and VISTA WiFi do not support downgrading from firmware
version 2.2.0 and above to a firmware version prior to 2.2.0.
To upgrade VISTA or VISTA WiFi to firmware version 2.2.0:
1. Dock the camera in a base or Transfer Station connected to your Evidence Library software.
The Evidence Library software automatically detects that the camera is docked and that its
firmware needs to be updated.
2. Using Evidence Library software, ensure the version 2.2.0 firmware is pushed to the camera.
Note: Evidence Library software can be set up to push firmware
manually or automatically.
The version 2.2.0 firmware is staged on the camera.
3. The next time you dock it, the VISTA or VISTA WiFi camera upgrades to the staged firmware
version 2.2.0.
4. Wait while the camera upgrades its firmware.
While the camera is upgrading, the LCD Display shows UPDATINGDONOT INTERRUPT.
Warning! Do not remove the camera from the dock while it upgrades
its firmware. Removing the camera from the dock while it upgrades can
cause the camera to stop functioning.
When it finishes upgrading, the camera sounds the camera ready alert (depending on your
alert notification selections).
5. The next time you undock the camera, it reboots itself.
While the camera is restarting, the LCD Display shows BOOTING.
6. When the camera finishes rebooting, you can use it normally.
Tip: After you have completed these upgrade instructions, if VISTA or VISTA
WiFi's LCD Display shows Err 30 or Err 120, contact WatchGuard Customer
Service.
128
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
Draft