Product Info
Table Of Contents
- VISTA HD Wearable Camera User Guide
- Important Notice
- Contents
- Introduction
- Using the VISTA Body Camera
- Overview
- Wearing VISTA and VISTA WiFi
- Wearing VISTA XLT
- Powering On and Off
- Starting and Stopping a Recorded Event
- Muting the Audio During a Recorded Event
- Categorizing a Recorded Event
- Docking the VISTA Body Camera
- About the VISTA Body Camera
- VISTA Body Camera Special Features
- Using VISTA WiFi or VISTA XLT with a Recording Group
- Appendix A: Using VISTA SmartConnect
- Appendix B: Using the QuickConnect Mobile Charger
- Appendix C: Upgrading VISTA, VISTA WiFi, and VISTA-Related Devices
- Appendix D: VISTA Transfer Station Setup
- Index
VISTA Transfer Station Hardware
VISTA Transfer Station Hardware
When you set up the VISTA Transfer Station hardware, you connect the power cable and the
Ethernet cable to the Transfer Station. You can add labels to the Transfer Station slots as well.
Note: WatchGuard offers rack options for mounting multiple Transfer Stations in
the same location. For information, contact your WatchGuard representative.
Included with the Transfer Station:
l Power cable
l Ethernet cable
l Sheet of Station ID/Slot # labels
Setting up the hardware
To set up the Transfer Station hardware:
1. If desired, use the provided Station ID/Slot # stickers to label the Transfer Station slots.
Tip: The labels assume an alphabetic Station ID, for example, B, then
slot numbers 1 through 8. In this example, for the Transfer Station with
the Station ID of B, you use the labels B1 through B8.
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
133
Draft