Product Info
Table Of Contents
- VISTA HD Wearable Camera User Guide
- Important Notice
- Contents
- Introduction
- Using the VISTA Body Camera
- Overview
- Wearing VISTA and VISTA WiFi
- Wearing VISTA XLT
- Powering On and Off
- Starting and Stopping a Recorded Event
- Muting the Audio During a Recorded Event
- Categorizing a Recorded Event
- Docking the VISTA Body Camera
- About the VISTA Body Camera
- VISTA Body Camera Special Features
- Using VISTA WiFi or VISTA XLT with a Recording Group
- Appendix A: Using VISTA SmartConnect
- Appendix B: Using the QuickConnect Mobile Charger
- Appendix C: Upgrading VISTA, VISTA WiFi, and VISTA-Related Devices
- Appendix D: VISTA Transfer Station Setup
- Index
Restarting the Transfer Station
Warning! Resetting a VISTA Transfer Station to factory default reverts any
values you set on the Transfer Station's configuration page back to the default
values.
To reset the VISTA Transfer Station back to factory default:
n Using a pin or a paper clip, press and hold (for at least 7 seconds) the Reset button on the
bottom of the Transfer Station.
Note: The Reset button is located near the power cable connector on the
bottom of the Transfer Station.
Restarting the Transfer Station
The Restart feature functions as a soft restart of the Transfer Station. To perform a soft restart
of the VISTA Transfer Station:
n Click Restart.
Configuring the Transfer Station
To configure a VISTA Transfer Station:
1. Set up a computer to access the VISTA Transfer Station factory default configuration web page
at its default IP address, 192.168.2.20.
2. If not already done, connect the Ethernet cable from the Transfer Station to the computer.
3. Open your web browser, enter the Transfer Station default IP address in the browser address
field, and press Enter.
The Secure Sign In screen opens for the connected Transfer Station.
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
139
Draft