Product Info
Table Of Contents
- VISTA HD Wearable Camera User Guide
- Important Notice
- Contents
- Introduction
- Using the VISTA Body Camera
- Overview
- Wearing VISTA and VISTA WiFi
- Wearing VISTA XLT
- Powering On and Off
- Starting and Stopping a Recorded Event
- Muting the Audio During a Recorded Event
- Categorizing a Recorded Event
- Docking the VISTA Body Camera
- About the VISTA Body Camera
- VISTA Body Camera Special Features
- Using VISTA WiFi or VISTA XLT with a Recording Group
- Appendix A: Using VISTA SmartConnect
- Appendix B: Using the QuickConnect Mobile Charger
- Appendix C: Upgrading VISTA, VISTA WiFi, and VISTA-Related Devices
- Appendix D: VISTA Transfer Station Setup
- Index
Using the VISTA Body Camera
Using the side chest mount
Warning! Do not wear the magnetic chest mounts near sensitive medical
equipment or implants such as pacemakers or other magnetically programmable
medical devices.
To use the side chest mount:
1. Separate the under-shirt
bracket from the over-shirt
bracket:
a. Hold the under-shirt
bracket with one hand.
b. With the other hand,
squeeze both slide buttons
on the over-shirt bracket
toward the middle.
c. While holding the slide
buttons in, pull the
brackets apart.
2. Match the anchor tab on the
over-shirt bracket with the slot
on the back of the camera.
3. Match the mounting tab on the
over-shirt bracket with the
quick mounting latch on the camera, then slide the latch over the tab.
4. Place the under-shirt bracket under your uniform where you want to wear the camera.
5. Place the over-shirt bracket, with the camera attached, against the under-shirt bracket, with
your uniform between them.
The magnets on both brackets line up automatically.
Caution: Realigning the brackets can cause them to snap together forcefully.
WatchGuard recommends that you hold the slide buttons in when you place the
brackets back together.
22
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
Draft