Product Info

Using the VISTA Body Camera
Docking the VISTABody Camera in a WiFi Base
Note: Not all VISTA Body Cameras or VISTA bases have the Wi-Fi® feature. For
more information, contact your WatchGuard representative.
When you dock the VISTA Body Camera in a VISTA WiFi Base:
l The camera's battery begins to charge, if needed
l The camera's firmware upgrades, if a firmware upgrade
has been staged on the camera
l VISTA WiFi or VISTA XLT pairs with the WiFi Base; when
it does, it becomes associated with the local recording
group (VISTA WiFi and VISTA XLT only)
When the camera becomes associated with the local
recording group, it is disassociated from any other
recording group.
When you dock the VISTA Body Camera in a VISTAWiFi Base
that is connected to an Evidence Library 4 Web (EL4 Web)
upload server or EvidenceLibrary.com (EL) upload appliance:
Note: WatchGuard recommends that you use EL4 Web version 4.2 (or later) or
EL for the best experience.
l The camera communicates to EL4 Web or EL that it has recorded events to upload
The camera must be configured to upload events directly to EL4 Web or EL from the WiFi Base.
l Recorded events are uploaded to EL4 Web or EL
l EL4 Web or EL sends commands and/or requests to the camera as applicable:
o
Mark any imported recorded events as import confirmed
The events confirmed as imported are immediately unprotected. This makes the storage
space available to be reused as needed.
o
Stage a firmware upgrade
The firmware upgrade is staged on the camera immediately, and then is applied the next
time the camera is docked.
When you undock the camera from the WiFi Base, it is ready for normal operation.
For more information about...
The WiFi Base, see VISTA WiFi Base on page 76.
Recording groups, see Using VISTAWiFi or VISTA XLT with a Recording Group on page 89.
Upgrading the WiFi Base, see Upgrading the VISTA WiFi Base and the Smart Power Switch on
page 129.
42
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
Draft