Product Info

Provisioning the camera
Provisioning the camera
Tip: Before using the VISTA Body Camera for the first time, fully charge and
provision it.
You provision your VISTA Body Camera while it is docked in a USB Base or VISTA Transfer
Station. When you provision the camera, you use your WatchGuard Evidence Library software
to assign a configuration and an officer name.
Depending on how your agency assigns its cameras, you may need to provision and check out
the camera each time you use it (for example, from a pool of cameras) or only rarely as its
configuration needs to be updated (for example, if a camera has been assigned to you long-
term).
To provision the VISTA Body Camera:
1. Dock the camera in the USB Base or Transfer Station connected to your Evidence Library
software.
2. Using Evidence Library software, create and/or assign a configuration and an officer to the
docked camera.
For instructions how to assign a configuration and officer to the camera, see your Evidence
Library software documentation.
As a configuration is applied to the camera, the display reads CONFIG. The configuration
update alert sounds when the update is finished.
VISTA Body Camera configuration
You can only create a VISTA Body Camera configuration in your Evidence Library software.
Note: For instructions how to create and set up a configuration for the VISTA
Body Camera, see your Evidence Library software documentation.
Some of the configuration properties you can set up for the VISTA Body Camera in your
Evidence Library software include:
l Agency or department name
l Time zone where the agency or department is located
l Officer name and badge ID
l Device ID
l Event tags including a list of possible event categories (page 37)
l Officer preferences for indicators, including (page 67)
o
Alert preference (none, tone, vibration, or tone and vibration together)
o
LED brightness
o
Tone volume
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
43
Draft