Product Info
Table Of Contents
- VISTA HD Wearable Camera User Guide
- Important Notice
- Contents
- Introduction
- Using the VISTA Body Camera
- Overview
- Wearing VISTA and VISTA WiFi
- Wearing VISTA XLT
- Powering On and Off
- Starting and Stopping a Recorded Event
- Muting the Audio During a Recorded Event
- Categorizing a Recorded Event
- Docking the VISTA Body Camera
- About the VISTA Body Camera
- VISTA Body Camera Special Features
- Using VISTA WiFi or VISTA XLT with a Recording Group
- Appendix A: Using VISTA SmartConnect
- Appendix B: Using the QuickConnect Mobile Charger
- Appendix C: Upgrading VISTA, VISTA WiFi, and VISTA-Related Devices
- Appendix D: VISTA Transfer Station Setup
- Index
VISTA and VISTAWiFi
VISTA and VISTAWiFi
Note: If a VISTA or VISTA WiFi is docked in a USBor WiFi Base while the upgrade
is being staged on the camera, the display does not show the staging process.
While the upgrade is being staged on a VISTA or VISTA WiFi in a Transfer Station, the
display:
l Storage Used meter fills with bars and Storage Percentage increases
l 8-character area scrolls DOWNLOADING
When the upgrade has finished staging, the Storage Used meter is full, the Storage
Percentage shows 100%, and the 8-character area scrolls DOWNLOADCOMPLETE for
about 5 seconds.
The next time you dock the camera in the USB Base, WiFi Base, or the Transfer Station, the
upgrade is applied. While the upgrade is being applied, UPDATING DO NOTINTERRUPT
scrolls on the display.
Warning! DONOT REMOVE the camera from the dock while its new firmware is
being applied. Removing the camera from the dock during the upgrade can cause
the camera to stop functioning.
When the upgrade has finished applying, the camera sounds the camera ready alert
(depending on your alert notification selections).
VISTAXLT
Note: If the VISTA XLT is docked in a USBor WiFi Base while the upgrade is being
staged on the camera, the display does not show the staging process.
While the upgrade is being staged on a VISTA XLT in a Transfer Station, the display:
l First line reads Upgrade
l Second line shows the percentage of the upgrade already
downloaded next to a progress bar
l Third line reads DOWNLOADING
When the upgrade has finished staging on the camera, the
percentage downloaded and progress bar show 100%, and the third line
reads DOWNLOADCOMPLETE for 5 seconds.
If VISTA XLT is undocked and not
recording an event, and has an upgrade staged on the camera,
the Upgrade Staged icon ( ) appears in the lower right corner
of the display.
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
49
Draft