Product Info
Table Of Contents
- VISTA HD Wearable Camera User Guide
- Important Notice
- Contents
- Introduction
- Using the VISTA Body Camera
- Overview
- Wearing VISTA and VISTA WiFi
- Wearing VISTA XLT
- Powering On and Off
- Starting and Stopping a Recorded Event
- Muting the Audio During a Recorded Event
- Categorizing a Recorded Event
- Docking the VISTA Body Camera
- About the VISTA Body Camera
- VISTA Body Camera Special Features
- Using VISTA WiFi or VISTA XLT with a Recording Group
- Appendix A: Using VISTA SmartConnect
- Appendix B: Using the QuickConnect Mobile Charger
- Appendix C: Upgrading VISTA, VISTA WiFi, and VISTA-Related Devices
- Appendix D: VISTA Transfer Station Setup
- Index
About the VISTA Body Camera
Connections
The WiFi Base has connections for a Wi-Fi antenna
cable and a WatchGuard-provided custom power/data
cable on the back.
The WiFi Base power/data cable must connect to the
Smart Power Switch. For more information about the
WiFi Base as part of the local recording group network,
see Using VISTAWiFi or VISTA XLT with a Recording
Group on page 89.
For more information about...
Using VISTA WiFi or VISTA XLT with the WiFi Base, see Docking the VISTABody Camera in a
WiFi Base on page 42.
Upgrading the WiFi Base, see Upgrading the VISTA WiFi Base and the Smart Power Switch on
page 129.
Setting up the VISTA WiFi Base
Typically, the VISTA WiFi Base, its windshield antenna, and the Smart Power Switch are
installed in the vehicle by your agency's installation technicians. For more information about
installing the VISTA WiFi system equipment in the vehicle, see the 4RE Vehicle Installation
Instructions.
78
VISTA Body Camera
WGD00120 Revision
ReviewDraft_070819
Draft