Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
Momentary Muting of the Audio
Note: A configuration setting in Evidence Library controls whether you can
mute your WatchGuard V300 Camera during a recorded event.
Muting audio
To temporarily suspend recording of audio by muting the microphone:
1. Press and hold the Backlight button to briefly mute the audio. Audio resumes when you
release the button.
Your administrator must set the configuration to allow muting.
The display shows MUTED while you hold down the Backlight button and RECORDING in a
smaller font.
2. Release the Backlight button.
Tip: You cannot mute the audio while you are categorizing a recorded event.
After you finish categorizing, you can again mute the audio.
Continuous mute
Your system administrator enables continuous mute. If enabled:
n Press and Hold the Function button for 2 seconds to mute the microphone during an active
recorded event. While muted, the camera displays MUTED on the LCD.
The camera alerts you every 15 seconds while it is muted. Your Admin configures the alert type
under officer device preferences.
The camera continues recording with the microphone muted until you press the Function
button again or stop the recording.
Note: Continuous mute and momentary mute can be configured and used
simultaneously, if permitted by department policy.
24
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)