Product Info

Docking the WatchGuard V300 Camera overview
Docking the WatchGuard V300 Camera overview
Dock the V300 to recharge the battery, upload evidence, and update firmware. WatchGuard
offers these bases where you can dock the V300:
l USB base (upload from)
l WiFi base (Upload via cellular in-car modem) (page 48)
l V300 Transfer Station(upload from) (page 68)
Note: The camera and battery can only dock in one direction on the bases.
You can dock the V300 Camera with the battery or dock the stand-alone battery in any of the
three available bases. Use the Wi-Fi base for incidental charging during your shift. Charging in a
vehicle base can impact the vehicle battery and can slow in warmer temperatures.
Caution: Battery charging stops at ambient temperatures greater than 35
degrees C (95 degrees F).
While docked, you can:
l Charge the battery (page 29)
l Upgrade firmware
l Upload recorded events from storage (page 31)
l Define a Record-After-the-Fact
®
(RATF) event (page 32)
l Request a state capture for troubleshooting (USB base only)
l Upgrade the camera software (USB base and Transfer Station only) (page 28)
The V300 cameras and bases can interact only with other V300 cameras and the 4RE.
The V300 must interact with Evidence Library software to be customized for your agency. For
that interaction to take place, the camera must be docked in a USB base or V300 Transfer
Station connected to the computer running your Evidence Library software.
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
25