Product Info

Docking the V300 Camera in a Transfer Station
Important! Set up and configure the WatchGuard V300 Transfer Station
(page 1) for use with your Evidence Library (EL) software.
When you dock the V300 Camera and battery or just the stand-alone battery, in a V300
Transfer Station connected to Evidence Library software:
l The V300 stand-alone battery charges
l The V300 Camera time and date synchronize with the Evidence Library (EL) system
Caution: V300 sets its internal date and time from the Evidence Library
software computer. If the computer date and time is set incorrectly, the camera
will be set incorrectly, and your video evidence will be marked with the incorrect
date and time.
l The camera communicates to the EL software that it has recorded events to upload; it can
upload from eight cameras simultaneously
l EL sends commands and requests to the camera:
o
Mark any imported recorded events as import confirmed
Events confirmed as imported are immediately unprotected. This makes the storage space
available to be reused.
o
Update the configuration
If the configuration is manually pushed to the camera (through the Evidence Library
checkout process), The configuration is updated immediately.
If the configuration is automatically pushed to the camera, the configuration is updated
after the battery is undocked.
o
Stage a firmware upgrade
The firmware upgrade is staged then applied to the camera immediately.
When you undock the camera and battery from the Transfer Station, they are ready for normal
operation.
26
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)