Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
V300 configuration
V300 configuration
You can only create a V300 configuration in your Evidence Library software.
Some of the configuration properties you can set up for the V300 include:
l Agency or department name l Officer preferences for indicators
l Time zone l Recording group interaction
l Officer name and badge ID l Connecting to SmartConnect
l Device ID l Network preferences
l Network preferences l Recording preferences
l Power-saving preferences l Power and storage-saving preferences
l Event tags
See your EL online help for more information.
Charging the battery
A full charge in the transfer station or USB base can take 6 hours. The battery can run for
approximately 12 hours on a full charge, depending on the configuration and video resolution.
n Dock the camera with battery or just the stand-alone battery in the USB base or the V300
Transfer Station.
When you dock just the battery you won't have the feedback status from the LED window that
you have when both are docked.
The camera charges faster when docked in a USB base that is plugged into an electrical outlet
or in a transfer station.
Tip: Before using the camera for the first time, fully charge the battery and
configure the camera.
WatchGuard recommends that you use the V300 USB base (plugged into an outlet) or the
transfer station inside your agency when fully charging the battery. Charging in a vehicle base
can impact the vehicle battery and can run slow in warmer temperatures. For the best battery
life and fastest charging times, charge the V300 in a cool environment.
Important! Battery charging stops at ambient temperatures greater than 35
degrees C (95 degrees F).
Camera charging display
While the V300 is charging:
l The green LED blinks
l The display alternates between CHARGING and the Device ID, and the Battery Charge icon
animates
When the camera is fully charged:
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
29