Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
l The display scrolls CHARGE COMPLETE once, then continuously shows the Device ID and the
Battery Charge icon
l The display shows 100% and a fully-filled Battery Charge icon for a few seconds, then
alternates between the Officer Name and the Device ID
l The green LED displays a steady light
l Two tones sound
Associating V300 with a recording group
When you dock your V300 in a WiFi base, the camera pairs with the base. This pairing allows
the camera to associate with the local recording group that includes other V300 cameras and
the 4RE DVR. A recording group is typically associated with a vehicle.
Note: You can pair multiple cameras with the same WiFi base.
See Using V300 with a recording group, page 61.
30
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)