Product Info

Uploading events
Uploading events
You can upload recorded events from your WatchGuard V300 Camera while it is docked in any
of the bases:
l V300 Transfer Station
Events upload automatically from a camera in the V300 Transfer Station.
l USB base
You can upload recorded events automatically or manually, depending on the settings in your
Evidence Library software. While the camera is uploading from a USB base, you can monitor its
upload progress in the Evidence Library (EL) software.
l WiFi base
Events upload automatically from V300 if the Wi-Fi base is connected to Evidence Library (EL)
upload server.
You can also upload over the cellular LTE connection to the EL upload server.
Note: WatchGuard supports upload over a cellular connection using the
Sierra Wireless® AirLink® MG90 High Performance Multi-Network
Vehicle Router, and Cradlepoint COR IBR900 Series or IBR1100 Series.
The camera must be configured to upload events to EL from the Wi-Fi base.
Important! Critical events always upload first.
Monitor event uploading
You can monitor the upload progress in Evidence Library.
l The display reads XX of YY, where XX is the current event being uploaded and YY is the
total number of events to upload
l The bars on the Storage Used meter disappear
l The red LED fast blinks during the entire upload process
When the camera is finished uploading critical events:
l The display scrolls CRITICALCOMPLETE one time then returns to XX of YY
l The red LED continues to fast blink during the entire upload process
l One long tone sounds
When the camera is finished uploading all events:
l The display scrolls UPLOADCOMPLETE
l Two long tones sound
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
31