Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
Power button
Power button
Use the Power button only to power the camera on or off. The
Power button is on the bottom of the camera.
See Power On and Off, page 20.
Record Start/Stop button
Use the Record Start/Stop button to start or stop a recorded event (page 21) on the
camera. The Record Start/Stop button is on the front of the camera. You can also use Record
to interrupt the info sequence.
Function button
With the top button you can control:
l Covert mode
l Transitions from STOP REC to MUTED
l Tagging an event
l Display of event tags
Display Backlight button
The Display Backlight button is on the right side as you look at the front of the camera.
The backlight turns on when you power up the camera until it reaches the ready screen.
The backlight turns on when you power off the camera and remains on until the camera powers
off.
Display Backlight functions
Use the Display Backlight button for multiple functions, including. Turn the display backlight
on with one button press to:
1. Show the camera status on the display
2. Step through the status sequence:
a. Press the Backlight button a second time, within 5 seconds, while backlight is on, to start
the display of the status sequence
b. Press the Backlight button while in status sequence, to advance to the next item in the
sequence (At end of sequence, it starts over)
c. End the sequence of status information on the display
o
The Backlight turns off about 8 seconds after going through all of the info screens,
o
The Record button interrupts the status sequence
3. Turn on a V300 access point (hotspot) for the SmartConnect smartphone application (page 1)
4. Cancel the sleep warning period (page 56)
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
35