Product Info

About the V300 Camera
5. Cancel the maximum recording time warning period (page 58)
6. Mute the audio momentarily (page 24)
V300 display
The display on the V300 shows icons and messages to indicate the status of the camera. The
icons show in the top half of the display. The messages show in the 8-character area on the
bottom half of the display. If a message is longer than 8 characters, the message scrolls. The
display is on the top of the camera.
The display informs you of:
l Status LED
Lets you know immediately if you are recording.
l Battery status
As the charge level decreases, the number of bars in the Battery Charge icon decreases
(page 1).
l Current recording length
The recorded event length shows as HH:MM:SS, for example, 1:23:59, and includes any
configured pre-event time (page 53).
l Date and time
The date shows as an abbreviation for the month with a 1- or 2-digit day of the month, for
example, NOV 3.
l Event categories
Each category shows as you cycle through the list, for example, DOMESTIC. If the item is
longer than the window screen, the item scrolls. The list of categories is configured in your
Evidence Library software.
l Number of recorded events in storage
l Officer name
l Recording status
The REC icon (lREC) shows even if the camera is not recording.
l Saved storage total
The saved storage total shows as a decimal value in GB, for example, 11.07 GB.
l Storage status
As the camera storage fills with recorded events, the Storage Used meter fills with bars and
the Storage Percentage increases (page 41).
l Upload status, if docked in the V300 Transfer Station or the WiFi base
The upload status shows the number of events uploaded out of the total number of events to
upload. Critical events upload first (page 31).
l Wi-Fi or GPS signal status
The Wi-Fi Signal Strength icon shows the status of the V300 Wi-Fi connection with the Wi-Fi
base (page 48).
36
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)