Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
LEDs
l Officer name
l Date and time
l Device ID
l Microphone on or off
l GPS location
Tip: The subtitles are always included with the video and audio in a recorded
event. Using your Evidence Library software, you can turn them off or on.
For more information...
See Record-After-the-Fact®, page 54
See PreEvent Capture, page 53
See Assigning a configuration and officer to the WatchGuard V300, page 28
See Uploading events, page 31
See Using V300 with a recording group, page 61
LEDs
Two bi-color LEDs on the front of the WiFi base show power and connection status. The left
LEDis either red or green.
Left LED (red and green)
LED state WiFi base state
Off Powered off
Red Undefined
Green Powered on
Blinking red Error condition
Blinking green In shutdown or wireless upload timeout
period
The left LED on the WiFi base blinks green when it successfully pairs with a V300 Camera. The
left LED blinks red if the pairing was not successful.
The right LED is either green or amber.
Right LED (green and amber)
LED state
V300 or battery docked
state WiFi base state
Off --- Not connected to camera or
upload server
Amber Docked Connected to upload server
Green Not docked Connected to camera (Wi-Fi
connection)
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
39