Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
Storage
Storage
The V300 Camera stores 24 to 36 hours of HD video at 1080 pixels. The camera uses a 128 GB
SD card.
When you need to free up storage space on the camera, upload recorded events (page 31)
from the camera to Evidence Library.
The V300 display shows a Storage Used icon and percentage used for
protected recorded events. As the camera records events and its storage
fills, the Storage Used icon fills with black and the percentage
increases.
Low storage and full storage messages
When the camera is about 10 minutes away from running out of
storage space, it alerts you with:
l Two short tones and/or a vibration (depending on your alert configuration settings)
l Slow-blinking red LED and Storage Used meter and icon on the display
When the camera storage is full, it alerts you with an error condition alert:
l Fast-blinking red LED
l Three short tones and/or a vibration (depending on the alert configuration settings)
l FULL message on the display
Warning! If storage fills completely, the camera stops recording new video.
Security
The V300 Camera encrypts data at rest and when uploading. Encryption at rest means the data
cannot be accessed even when the memory is removed.
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
41