Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
About the V300 Camera
Information Sequence
The Information Sequence screens display the status of the camera as part of the bootup
process or on-demand.
Press the Display Backlight button twice within 2 seconds to start the information
sequence. The screens appear in this order:
1. Number of recorded events in storage and total saved storage in gigabytes.
This screen also shows RATF (Record After The Fact) if RATF is enabled.
2. Officer name.
3. Date in the format DDD MM YYYY and 24-hour time in the format HH:MM:SS.
DDD is the abbreviation for the day name. MMM is the abbreviation for month. DD is the
abbreviation for the date number.
For example, MONJUL 22 2019 and 12:23:49.
4. Device ID.
You can press and release the Display Backlight button to manually advance through
information sequence screens. When manually advancing the sequence, each screen stays on
the display about 4 seconds.
42
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)