Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
V300 Transfer Station
V300 Transfer Station
You can mount either the battery in the V300 Transfer Station or mount the camera and
battery together.
Graphic to show both views
When you dock the V300 Camera, the camera automatically starts charging, if needed. The
camera also uses the Transfer Station to:
l Upload recorded events from storage
l Configure the camera
l Update firmware
The Transfer Station lets your Evidence Library software interact with multiple V300 Cameras
simultaneously. You can connect multiple Transfer Stations to one instance of Evidence Library
software.
Each Transfer Station has eight slots for cameras.
LEDs
Three LEDs on each slot of the Transfer Station show power and connection status:
l Green, left position: When lit, indicates that the Transfer Station is powered on
l Amber, center position: When lit, indicates that the Transfer Station is connected to
Evidence Library software; when blinking, indicates data is being transferred
l Red, right position: When lit, indicates an error condition
Connections
The Transfer Station has connections for both a power cable and an Ethernet cable. You power
the Transfer Station off and on using the power switch.
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
45