Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
V300 Special Features
Overview
Important! All of the special features are configured in your Evidence Library
software.
The V300 Camera contains features that give you more recording options and help you save
battery power and storage.
l Recording features:
o
Pre-Event Capture: captures and saves up to two minutes of video before a recorded-
event start ((page 53))
o
Record-After-the-Fact
®
: capture video that you didn't get when it happened. If RATF is
enabled the camera continuously captures and saves video ((page 54)).
o
Force Microphone On: captures audio whenever it is capturing and saving video ((page
55))
l Battery and storage saving features that help save battery power:
o
Sleep power state: the camera enters a low power state after a period of time with no
activity ((page 56))
o
Automatic Off: the camera turns itself off after a period of time with no activity ((page
57))
o
Maximum Recorded Event Time: the camera automatically stops a recorded event
when it reaches a specified duration ((page 58))
o
Recording Reminder Alert: the camera notifies you at regular intervals that it is still
capturing a recorded event ((page 59))
52
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)