Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
Force Microphone On
Force Microphone On
The Force Microphone On feature lets you capture audio whenever the V300 camera is
capturing and saving video. Audio is NOT typically included in pre-event video or Record-After-
the-Fact
®
events.
Note: When you enable Force Microphone On, the camera captures audio with
both pre-event video (page 53) and RATF events.
Force Microphone On is set in the configuration settings of Evidence Library by your
Administrator.
For more information about...
Recorded events, See Video, Audio, and Subtitle Evidence, page 38.
Pre-event video, See PreEvent Capture, page 53.
RATF events, See Record-After-the-Fact®, page 54.
Recording groups, See Using V300 with a recording group, page 61.
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
55