Product Info

V300 Special Features
Sleep Power State
The Sleep power state on the V300 Camera allows the camera to go into a low-power state
designed to help you conserve battery power. You configure the Sleep state in your Evidence
Library software.
When the V300 Camera is configured for Sleep state, after a period of time with no movement
and/or button presses, the camera enters a low power state where it cannot capture any video
or audio.
The Sleep power state provides a significant reduction in power consumption. Starting with a
fully charged battery, the V300 Camera can remain in its Sleep power state for more than 30
hours before powering off due to a discharged battery.
For Sleep state, in your Evidence Library software you configure:
l Whether the camera will sleep or not
l What makes the camera sleep (lack of movement and/or button presses)
l How much time must elapse with no activity before the camera goes to sleep
When the camera is asleep, the display reads SLEEP and the green LED blinks slowly. The
display continues to show battery and storage status indicators.
Sleep warning period
About 15 seconds before it goes to sleep, the camera warns you that it is about to go into Sleep
state:
l Descending tones sound with vibration (depending on the configured alert notification)
l SLEEP blinks on the display
You can press the Display Backlight button or the Record Start/Stop button at any time to
keep the camera from going to sleep.
Note: Pressing the Record Start/Stop button also starts a recorded event.
Exiting Sleep state
TheV300 Camera exits Sleep state when you move it or press a button. From Sleep state, the
camera is ready to record in about 1 second.
56
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)