Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
4RE DVR
The SPS is required to form a recording group. There can only be one Smart Power Switch in a
recording group.
4RE DVR
Note: The 4RE DVR must be at firmware version 4.0.7 or later to participate in a
recording group.
If your agency uses the 4RE DVR as part of a local recording group network, the 4RE DVR:
l Initiates group recordings
The 4RE uses the recording group network to inform the other group members when it starts a
recorded event. The other group members can then join in the group recording by starting their
own recorded events.
l Stops group recordings
The 4RE uses the recording group network to inform the other group members when it stops a
recorded event. The other group members then stop their own recorded events.
Only the 4RE DVR can stop a group recording. The other group members can stop their own
individual recorded events; but, only the 4RE can stop all of the members' recorded events that
are part of the group recording at the same time.
l Responds to group-recording starts by other group members
Through the recording group network, the 4RE is informed by other group members when they
start recorded events. 4RE can then join the group recording by starting its own recorded
event.
l Passes on its event categorization to other members' recorded events in the group recording
The category you assign on the 4RE to a recorded event that is part of a group recording is
passed on to other group members' recorded events that are part of the same group recording.
The other group members can choose to categorize their own recorded events, overriding any
category passed to them by the 4RE.
The 4RE DVR connects to the recording group network with a wired connection into the SPS. It
also connects (wired connection) to the power source (vehicle battery).
The 4RE DVR is REQUIRED to form a recording group. There can only be one 4RE DVR in a
recording group. (Do we need this statement?)
For more information about the 4RE DVR, see the 4RE In-Car Video User Guide.
V300 Camera
As part of the local recording group network, the V300:
l Pairs with the WiFi base
After docking (page 25) and pairing the cameras with the Wi-Fi base, the pairing associates
the cameras with the local recording group.
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
63