Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
Transfer Station Setup Overview
Transfer Station Setup Overview
The Transfer Station lets your agency upload video evidence to Evidence Library (EL) software
from multiple V300 Cameras simultaneously. Each Transfer Station has eight slots for the
V300 Cameras and stand-alone batteries. You can connect multiple transfer stations to one
instance of Evidence Library software, but you must set up and configure each Transfer Station
separately.
Important! Use the Transfer Station to upload events to EL Cloud or EL On
Premise.events.
When the transfer station is on, the power LED is on. To set up the Transfer Station:
1. Set up the Transfer Station hardware. ((page 70))
2. Configure the Transfer Station so the V300s docked in it will upload to EL. (page 1)
Important! WatchGuard recommends that an administrator set up the
Transfer Station, or that your IT administrator be on-call.
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
69