Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
V300 Transfer Station
Setting up WatchGuard V300 Transfer Station
hardware
The V300 Transfer Station lets your agency upload video evidence to Evidence Library (EL)
software from multiple V300 Cameras simultaneously. Each V300 Transfer Station has eight
slots for the V300 Cameras and batteries or stand-alone batteries. You can connect multiple
transfer stations to one instance of Evidence Library software. Each transfer station must be
set up and configured separately.
Important! To use the V300 Transfer Station to upload events, your Evidence
Library software must be EvidenceLibrary.com (EL).
WatchGuard provides you with a
l Power cable
l Ethernet cable
l Station ID and Slot # stickers. Need part #s
WatchGuard offers rack options for mounting multiple transfer stations in the same location.
For information, contact WatchGuard representative.
Set up the hardware
To set up the V300 Transfer Station hardware:
1. Use the provided Station ID/Slot # stickers to label the Transfer Station slots.
Tip: The labels assume an alphabetic Station ID, for example, A, then slot
numbers 1 through 8.
70
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)