Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
V300 Transfer Station
V300 Transfer Station Configuration Settings
Important! To use the V300 Transfer Station to upload events, your Evidence
Library software must be Evidence Library 4 or EvidenceLibrary.com (EL).
Configure each V300 Transfer Station individually using a web page specific to the Transfer
Station. When you configure the V300 Transfer Station, you configure:
l Transfer Station Settings
l V300 Camera Settings (page 74)
Admin Transfer Station Settings
1. Connect the Ethernet cable from the Transfer Station to the computer.
2. Open your web browser and enter https://192.168.2.20, the Transfer Station default IP
address.
3. Log in to your Transfer Station web page on the Secure Sign In screen.
4. Enter the Username and Password (Admin, V1$T@xfr).
5. Click login.
Transfer Station Settings
The Current Transfer Station Configuration web page opens with the default Transfer Station
default settings.
72
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)