Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
V300 Transfer Station
3. Click Save V300 Settings.
Because the Transfer Station IP address changed, the default configuration web page is no
longer valid and the system logs you out.
DHCP IP Config
If you choose to go with DHCP for your IP Config, complete the two screens shown here.
1. Enter the Tenant ID. (Optional. Call Customer Support to get the ID.)
2. Enter the Upload Server Config.
3. Enter the Primary Upload Server Hostname.
4. Enter the Secondary Upload Server Hostname (Optional)
V300 Camera Settings
Set the Upload Server IP address and Port, indicating the Evidence Library server where
your cameras should upload video evidence.
Tip: The upload server for Evidence Library can also be called the Wireless
Import Service.
Upgrade V300 Transfer Station
To upgrade software or firmware, choose your files and click Upgrade for the one you want to
upgrade.
74
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)