Product Info
Table Of Contents
- Important Notice
- Introduction
- Using the V300
- Using WatchGuard V300 Camera
- Basic workflow
- Wearing WatchGuard V300 Camera
- V300 Camera Field Of View
- Power On and Off
- Starting and Stopping a Recorded Event
- Categorizing a Recorded Event
- Momentary Muting of the Audio
- Docking the WatchGuard V300 Camera overview
- Docking the V300 Camera in a Transfer Station
- Docking and UnDocking the V300 Camera in a USB base
- Uploading events
- About the V300 Camera
- V300 Special Features
- Using V300 with a recording group
- V300 Transfer Station
- Internal Only - debug
Administrative functions
Important! After you upgrade the Transfer Station, power it off and then on
again so the cameras recognize the upgrade.
Administrative functions
Only an Admin can perform the functions shown here.
Change Username and Password
To change the default Username and Password:
1. Enter a new Username.
2. Enter a new Password.
3. Click Save Changes.
Because the login credentials changed, the server logs you out of the Transfer Station then
asks you to log in using the new credentials.
Disable Transfer Station
Disable can function as another level of security. Disabling the configuration page after you
finish configuring the Transfer Station prevents others from accessing the configuration page to
make authorized changes. This includes other authorized administrators. To configure the
Transfer Station after disabling, reset the Transfer Station back to factory defaults.
To reset the Transfer Station back to factory default:
1. Use a pin or paper clip
2. Press and hold for at least 7 seconds the Reset button on the bottom of the Transfer Station.
Restart Transfer Station
Click Restart to restart the current V300 Transfer Station.
Restarting interrupts any in-progress transfers between docked V300 Cameras and the EL
upload server. After restart, log in to access the configuration web page.
WatchGuard V300 Wearable Camera User
Guide WGD00169 Revision A (Draft)
75