Product Info

Table Of Contents
Internal Only - debug
V300 Transfer Station debug feature
An HTTPS web console lets you access a transfer station remotely, if the transfer station is
accessible on the network through Ethernet/IP.
This feature provides the same access and control that is done with the debug console but
eliminates the need for debug board, debug ribbon cable, and Serial-to-USB cable. [[[Undefined
variable Variables.G2TSShort]]] boards with ESD protection do not provide physical console
access. The HTTPS debug feature allows SVT and Engineering to continue using the transfer
station console access over IP.
As long as you have access to the customer network, you can perform remote debugging.
l The debug page is hidden from customers, available only to Technical Support, Customer
Service, and Engineering.
l The debug page is protected by a TBD username and TBD password
l Debug access is available in the released firmware
l The debug user logs onto the V300 Transfer Station
l All debug user key strokes are captured
l The slow blinking red LED means the V300 Transfer Station MAC address has not been
provisioned.
V300 Utility tool
https://watchguardvideo.atlassian.net/wiki/spaces/G2WEAR/pages/796295342
/V300+utility+tool
The utility tool lets you perform basic tests including:
l Upload evidence from the camera to a local desktop
l Build an HTML page that includes all the DASH manifests
l Playback the evidence using 3 major browsers
l Upload and parse evidence database
l Upload and parse configuration
l Delete uploaded file locally, not on device
78
WatchGuard V300 Wearable Camera
User Guide WGD00169 Revision A
(Draft)