WatchGuard XTM 5 Series Hardware Guide XTM 515, 525, 535, 545 NC2AE8
Copyright and Patent Information Copyright© 1998–2012 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies, Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their respective owners.
Hardware Specifications WatchGuard® XTM security appliances deliver unparalleled unified threat management, superior performance, ease of use, and value for your growing network. Our security subscriptions give you fully integrated protection from spyware, spam, viruses, worms, trojans, web-based exploits, and blended threats. From firewall and VPN protection to secure remote access, WatchGuard devices support a broad range of network environments.
Hardware Specifications Package Contents Instructions to find this Hardware Guide XTM 5 Series appliance Quick Start Guide Hardware warranty card LiveSecurity® Service activation card Safety Notices Declaration of Conformity 1 straight-through Ethernet cable (green) 1 cross-over Ethernet cable (red) 1 serial cable with an RJ45 connector 1 power cord 4 rubber pads for the bottom of the device 1 rack-mounting kit About Your Hardware Hardware Specifications XTM 5 Series Processor
Hardware Specifications Environmental Requirements To safely install your XTM 5 Series device, we recommend that you: Install it in a network rack Put it in a secure area, such as a locked room, to block the device from people who do not have permission to use it Connect it to a conditioned power supply to prevent damage from sudden power changes Other environmental requirements: Operating temperature 0 – 40°C (32 – 104°F) Operating relative humidity 10% - 85% non-condensing Non-operating tempe
Hardware Specifications Front View The front of the device. This is a close-up of the right side of the front of the device. LCD indicator panel Device status information appears on the LCD screen. Press the buttons below the screen to change the information that appears on the screen. For more information, see “Use the LCD Interface” on page 8. LCD console buttons Press the LCD console buttons to see status information and start recovery procedures.
Hardware Specifications Dual USB interface Connect a USB storage device to use for USB backup and restore, or to store a support snapshot. For more information about USB functions, see the Fireware XTM WatchGuard System Manager Help or Fireware XTM Web UI Help. Network Interfaces The interfaces have standard RJ45 connectors and are labeled 0,1,2,3,4,5,6. Interface 0 — supports link speeds of 10 or 100 Mbps. Interfaces 1 - 6 — support link speeds of 10, 100, or 1000 Mbps.
Hardware Specifications Rear View The AC receptacle, fans, and power switch are on the rear of the device. AC receptacle Accepts a detachable AC power cord supplied with the device. The power supply for the device is a WatchGuard standard auto-sensing AC power supply. Fans The fans decrease the internal temperature of the device. Power switch Controls the power supplied to the device. To power on the device, press the switch. To power off the device, press and hold the switch for at least 5 seconds.
Hardware Specifications Safety Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Read these instructions carefully before you operate the product, and refer to them as needed for continued safe operation of your product. Product Safety Certification The WatchGuard product is safety certified for these standards: o o o CAN/CSA C22.2 No.
Hardware Specifications Use the LCD Interface You can use the LCD interface and buttons for different operations. The XTM 5 Series can operate in two modes: Normal Mode The device normal operating mode, with the XTM 5 Series device booting from the Fireware XTM OS and operating with the rules set in the configuration file you have saved to the device. Safe Mode In safe mode, you can get access to an XTM 5 Series device when normal access to the device is lost.
Hardware Specifications Use the LCD Interface in Normal Mode The XTM 5 Series device automatically boots in normal mode, unless you specifically put it in safe mode. To operate, the device uses the installed Fireware XTM OS and the rules in the configuration file you have saved to the device. You can use the four arrow buttons to see information about the device on the LCD screen. In normal mode, you use the buttons to navigate the hierarchical LCD interface menu.
Hardware Specifications Example To see the CPU temperature of the XTM 5 Series device on your LCD screen: 1. Press the Right Arrow button to scroll through options until Hardware Monitor appears. 2. Press the Down Arrow button to see the options below that menu item. 3. Press the Right Arrow button to scroll through the items in the Hardware Monitor menu until CPU temperature appears. 4. Press the Up Arrow button to return to the main category level.
Legal and Regulatory Information Limited Hardware Warranty This Limited Hardware Warranty (the “Warranty”) applies to the enclosed hardware product, not including any associated software, which is licensed pursuant to a separate end-user license agreement and warranty (the “Product”). BY USING THE PRODUCT, YOU (either an individual or a single entity) AGREE TO THE TERMS HEREOF.
Legal and Regulatory Information OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY, THE PRODUCT). 4. LIMITATION AND LIABILITY. WATCHGUARD'S LIABILITY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT.
Legal and Regulatory Information Declaration of Conformity Hardware Guide 13
Legal and Regulatory Information FCC Certification This device has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
Legal and Regulatory Information People’s Republic of China Electronic Industry Standard This table is presented in accordance with SJ/T11364-2006, Marking for Control of Pollution Caused by Electronic Information Products, implemented in November 2006. RoHS Statement The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous Substances (“RoHS directive”‘) that became valid on July 1, 2006.
Legal and Regulatory Information WEEE Statement WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment (WEEE). The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the reduction of WEEE through reuse, recovery, and recycling of WEEE.
Legal and Regulatory Information Licensing Some components of the WatchGuard System Manager software are distributed with source code covered under one or more third party or open source licenses. You can find full licensing information in the product documentation on our public web site at www.watchguard.com/help/documentation. We include below the full text of the GNU General Public License.
Legal and Regulatory Information We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software.
Legal and Regulatory Information conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole.
Legal and Regulatory Information 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
Legal and Regulatory Information NO WARRANTY 1. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Legal and Regulatory Information 22 WatchGuard XTM 5 Series
