Hardware Guide
Table Of Contents
- WatchGuard Firebox T40/T40-W Hardware Guide
- Notices
- Product Safety Certification
- Safety Warning
- Disclaimer
- Hinweise Zur Sicherheit
- Aviso De Seguridad
- Federal Communications Commission Interference Statement
- CE Notice
- RoHS Statement
- WEEE Statement
- REACH
- Industry Canada Statement
- Caution: (Wireless)
- Avertissement:
- For Mobile Device Usage (Wireless)
- Limited Hardware Warranty
- Declaration of Conformity
WatchGuard Firebox T40/T40-W Hardware Guide
Interface Specifications
Network Interfaces
5 RJ45 connectors, 1000Base-TX (10/100/1000Mbps)
1 Embedded 4G/LTE wireless wan module
Radio Type and
Frequency Band
(T40–CW)
Dual radios, one dedicated to 2.4 GHz for 2x2, the other to 5 GHz for
4x4.
Both radios operate in 802.11ac
:
I/O Interfaces 2x USB3.0, Type-A
1 RJ45 Serial Port
Environmental Requirements
To safely install your Firebox, we recommend that you:
n Install it indoors.
n Put it in a secure area, such as a locked room, to block the device from people who do not have
permission to use it.
n Connect it to a conditioned power supply to prevent damage from sudden power changes.
Other environmental requirements:
n Operating temperature: 0° to 40°C (32° to 104°F)
n Operating humidity: 5% to 90% non-condensing
n Non-operating temperature: –25° to 75°C (-13° to 167°F)
n Non-operating humidity: 0% to 95% non-condensing
WatchGuard Technologies, Inc. v