User guide

About Mobile VPN with PPTP
258 Firebox X Edge e-Series
Enable PPTP on the Edge
1. To connect to the System Status page, type https:// and the IP address of the Firebox X Edge trusted
interface in the browser address bar.
The default URL is https://192.168.111.1
2. From the navigation bar, select VPN > Mobile VPN.
The Mobile User page appears.
3. To enable PPTP, select the Activate remote user VPN with Mobile VPN with PPTP check box.
4. Select the Enable drop from 128-bit to 40-bit check box to allow the tunnels to drop from 128-bit to
40-bit encryption for connections that are less reliable.
The Firebox X Edge always tries to use 128-bit encryption first. It uses 40-bit encryption if the client
cannot use the 128-bit encrypted connection. Usually, only customers outside the United States use
this check box.
5. Select the Log all allowed PPTP traffic to have the Edge record a log message for all PPTP traffic.