User guide

Network Settings
82 Firebox X Edge e-Series
Set optional network DHCP address reservations
You can manually assign an IP address to a specified computer on your optional network. The Firebox X Edge
identifies the computer by its MAC address.
1. Use your browser to connect to the System Status page. From the navigation bar, select Network >
Optional.
The Optional Network Configuration page appears.
2. Click the DHCP Reservations button.
The DHCP Address Reservations page appears.
3. Type a static IP address in the IP Address field. The IP address must be on the optional network.
For example, if the optional network starts with 192.168.112.1, you can enter 192.168.112.2 to 192.168.112.251.
4. Type the MAC address of the computer on the optional network in the MAC Address field. You must
enter the MAC address as 12 hexadecimal digits with no space, dash, or semicolon characters.
Click Add.
5. Click Submit.
About DHCP relay agents
One way to get IP addresses for the computers on the trusted or optional networks is to use a DHCP server on
a different network.
The Firebox can send a DHCP request from a DHCP client to a DHCP server at a different location through a
VPN tunnel. It gives the reply to computers on the trusted or optional network. This option lets computers in
more than one office use the same network address range. In this procedure, the Firebox is a DHCP relay agent.
You must set up a VPN tunnel between the Edge and the DHCP server for this feature to operate correctly.