User guide

User Guide 169
AC Power Adapter
The AC power adapter supplies power for the Firebox X Edge e-Series. You must use the correct plug for
the AC power adapter for the power source used in your country.
The international plug kit includes four plugs: Q-NA (North America), Q-UK (United Kingdom), Q-EU
(European Union), and Q-SAA (Asia).
Removing a plug from the AC power adapter
If the plug installed in the AC power adapter does not match your power source:
1 Use your thumb or finger to move the locking key on the AC power adapter down.
2 Hold the bottom of the plug.
3 Pull up from the bottom of the plug to remove it from the AC power adapter.
Connecting a plug to the AC power adapter
To install a different plug in the AC power adapter:
1 Put the top of the new plug in the AC power adapter at a 45-degree angle.
You must put in the top of the new plug first. Do not use force to put the plug into the adapter.
2 Push the bottom of the new plug into the AC power adapter.
The plug clicks into position.
About the Firebox X Edge e-Series Wireless .
The Firebox X Edge e-Series Wireless conforms to IEEE 802.11g/b wireless LAN standards. Some key fea-
tures that have an effect on performance of an 802.11g/b wireless device include antenna directional
gain, signal attenuation (path loss), and channel data rate.