WatchGuard® SSL 100 Quick Start Guide WatchGuard® Technologies, Inc.
Getting Started 1 Register with LiveSecurity® Service • F ind the serial number on your device and record it. • Go to http://www.watchguard.com/activate • Log in. NOTE: If you are new to WatchGuard, follow the instructions to create a profile. • F ollow the instructions on the screen. • It is a good idea to download and extract your WatchGuard SSL feature key during activation. Extract the feature key on to the computer you will use to configure your WatchGuard SSL 100.
Next Steps Congratulations! You have finished basic network setup of your WatchGuard SSL 100. You can now put the WatchGuard SSL 100 in your network and use the WatchGuard SSL Web UI to continue configuration, management, and monitoring tasks. If you configured your WatchGuard SSL in Single Interface mode… If you configured your WatchGuard SSL in Dual Interface mode… • W hen you put the WatchGuard SSL in your network, make sure you connect to Eth0. Eth1 is available only during the Quick Setup Wizard.
WATCHGUARD TECHNICAL SUPPORT 1.877.232.3531 (U.S. and Canada) +1.206.613.0456 (all other countries) www.watchguard.com/support ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104 WEB: www.watchguard.com • U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895 © 2009 WatchGuard Technologies, Inc. All rights reserved. WatchGuard and the WatchGuard Logo are either trademarks or registered trademarks of WatchGuard Technologies, Inc.
