User guide

WATCHGUARD SYSTEM MANAGER AND FIREWARE WSM/FIREWARE 10.2.7
RELEASE NOTES JANUARY 22, 2009 PAGE 2
WatchGuard System Manager v10.2.7 Minimum System
Requirements
If you have WatchGuard System
Manager client software only
installed
If you install WatchGuard System
Manager and WatchGuard Server
software
Operating System
Windows Vista (32-bit), XP SP2 (32-
bit), Windows Server 2003 (32-bit)
Windows Vista (32-bit), Windows XP
SP2 (32-bit), Windows Server 2003 (32-
bit)
Browser IE 6, IE 7, Firefox v2 N/A
CPU Intel Pentium IV Intel Pentium IV
Processor Speed 1 GHz 2 GHz
Memory 512 MB 1 GB
Available Disk Space 80 MB 1GB
Downloading Software
To download WSM and Fireware v10.2.7:
1. Go to the LiveSecurity web site’s Software Downloads page at
http://www.watchguard.com/archive/softwarecenter.asp
2. Log in to the LiveSecurity web site. Then, select the product line you use and look for the
WSM and Fireware v10.2.7 software download section.
Installation and Upgrade
Before you install the WatchGuard System Manager software, read the information in the Known Issues
section below.
Note The WSM v10.2.7 installer is not a full WSM install. To upgrade to WSM v10.2.7 you must have
WSM v10.2 or later installed first. Review the WSM v10.2 release notes for the WSM v10.2 install
instructions.
To upgrade to WSM and Fireware v10.2.7 if your Firebox is currently running WSM and
Fireware v10.2.x
1. Back up your current Firebox image using Policy Manager File > Backup.
2. Close all applications and stop all servers using the WatchGuard toolbar before you start to
uninstall WSM.
3. If you use a Management Server, make a backup of your Management Server configuration
before you upgrade (right-click the Management Server icon and select
Backup/Restore).
4. Launch WSM10_2_7.exe and follow the on-screen installation directions. Note: You must
have WSM v10.2 or later installed before you run the WSM10_2_7.exe.
5. Launch the fireware10_2_7.exe and follow the on-screen installation directions.