User guide

Installing the Firebox X Edge
26 WatchGuard Firebox X Edge
You must have a subscription to the LiveSecurity service before you
can get license keys for upgrades that you purchase. To install an
upgrade, you must log in to LiveSecurity service and type your
upgrade key. You then get a feature key to activate the features on
your Firebox X Edge.
You must have the serial number of your Firebox X Edge to register.
The Edge serial number is on the bottom of the device. Record the
serial number in the table below:
1 Register your Firebox X Edge with the LiveSecurity Service at the
WatchGuard Web site:
http://www.watchguard.com/activate
N OTE N OTE
To activate the LiveSecurity Service, your browser must have
JavaScript enabled.
2 If you are registered at the WatchGuard Web site, type your user
name and password. If you are not registered, you must create a
user profile. To do this, follow the instructions on the Web site.
3 Record your LiveSecurity Service user profile information in the
table below. Keep this information confidential.
WatchGuard LiveSecurity User Profile
4
If a model upgrade key is included with your model, activate it
by going to:
http://www.watchguard.com/upgrade
5 Select your product and use the instructions for product
activation. At this time you can configure your Edge.
User name:
Password:
Serial Number: