Technical Specifications

The painless way
to a brand-new drain.
UN-NFIT 11.12-G • © Watco Manufacturing Company 2012 • Printed in U.S.A.
Watco Manufacturing Company
For current pricing visit www.watcomfg.com.
• Covers strainer body  anges up to 2-7/8
inches in diameter
• PUSH PULL® stopper with excellent
clearance for high- ow draining and
easy cleaning
• Installs with silicone adhesive
(supplied) or the NEW Watco
Adapter Pin.
• Available with one-hole, two-hole,
or the Watco Innovator® over ow plate
• The quickest, most economical solution for high-volume
installations, or replacing just one or two drains at a time
For more information contact:
For strainer bodies without
crossbars. Leave the old
strainer body in the tub. Apply
the adhesive (supplied with the
NuFit® kit) to its  ange.
Press the NuFit® body over
the old strainer body.
You’re done. A sparkling
new drain with no tools, no
plumbing required.
2. Just minutes with Watco adhesive
1. NEW Watco Adapter Pin
quick, easy ways to install:
2
For old strainer bodies with
crossbars in place.
Solid brass pins allows easy removal for
cleaning. Choose combination 3/8 and
5/16 threads, or No. 10-24 threads for
trip levers.
Finishes (add suffi x)
Chrome - CP
Brushed Chrome - CB
Brushed Nickel - BN
Polished Brass - PB
Oil-Rubbed Bronze - BZ
No removing old strainer body!
Example: 48700-PP-BZ
With Watco adhesive:
Strainer: 48750-PP-CP-G
Standard: 48750-PP-CP
With 3/8, 5/16 brass pin:
Strainer: 48751-PP-CP-G
Standard: 48751-PP-CP
With No. 10-24 brass pin for trip levers:
Strainer: 48752-PP-CP-G
Standard: 48752-PP-CP
Available with one-hole, two-hole or
Watco Innovator® over ow plate