MODEL: EMPIRE30 / EMBASSY30 WASH STAND INSTALLATION GUIDE
MODEL: EMPIRE30 / EMBASSY30 Recommended Tools: - Drill - Level - Hammer - Pencil - Silicone - Phillips head screwdriver - Safety Glasses BEFORE YOU BEGIN D ** IMPORTANT ** 1) Professional installation by two-person crew is required for this fixture 2) Assemble this fixture on a soft blanket is highly recommended 3) We do recommend installing wood blocking inside your wall to add support to your stand.
MODEL: EMPIRE30 / EMBASSY30 INSTALLATION STEP 1) Assemble the back support as shown. Tighten set screw on the escutcheon and 3-way joint. 2) Assemble support legs as shown. Use a level to ensure the top escutcheons are straight. Tighten set screws on the 3-way joints, 4-way joints and all escutcheons. A D E 3) After assembling both sides support legs, attach front bar to join both sides and tighten set screw.
MODEL: EMPIRE30 / EMBASSY30 MARBLE TOP INSTALLATION Storage: 1. Keep marble top in it’s box until installation 2: Store box vertically in a place safe from being hit or knocked over 3. Do not stack anything on top of the box Opening Box: 1. Before unpacking please make sure you have installation requirement present: > A professional two man crew > Tools and materials required: a. Flat, non-abrasive work surface, such as a soft blanket b. Carpenter’s level c. Sealant 2.
MODEL: EMPIRE30 / EMBASSY30 MARBLE TOP INSTALLATION Installation: 1.
