Installation Guide

MODEL: F5-0010
C) SUPPLY CONNECTION
1) Connect hoses (not included) to angle stops.
2) Tighten all connections.
3) Flush out water for two minutes before connect hose to faucet shank
D) FINAL INSPECTION
1) Ensure all connections are tightened properly.
2) Turn on main water supply.
3) Turn on and off cold and hot water respectively.
4) Turn on both hot and cold water and turn off. Check for leaks.
5) Remove the aerator cap and aerator. Check for debris. Clean if necessary .
6) Reinstall aerator.