Installation Guide

ManualsBrandsWater Creation ManualsKitchen ApplianceFarmhouse Apron Front Small Radius Stainless Steel 36 in. Double Bowl Kitchen Sink in Satin

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

Adjustable Wrench

Channel Locks

Regular Screwdriver

Phillips Screwdriver

10'

Saber Saw Pipe Wrench

Level

Tubing Cutter

Square

Tape Measure

Electric Drill

2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20 21 22 23 24

Hacksaw

Sealant

RECOMMENDED TOOLS AND MATERIALS

MOUNTING OPTIONS

Flush Mount Under Countertop

COUNTERTOP

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing, supply

stores. It is essential that the tools and materials be on hand before work is begun.

Apron Front Kitchen Sink

- 1 -

Summary of content (6 pages)

PAGE 1
INSTALLATION INSTRUCTIONS CARE AND MAINTENANCE Apron Front Kitchen Sink RECOMMENDED TOOLS AND MATERIALS Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing, supply stores. It is essential that the tools and materials be on hand before work is begun.
PAGE 2
INSTALLATION PROCEDURES Typical installation may include cabinet support preparation, installation of faucet & pop-up drain, connection of flexible water supply lines, attachment of sink to cabinet and installation of drain & water supplies. Sink Mounting Provisions – The cabinet area beneath the sink must be reinforced to provide sufficient support. The wood support frame for the sink must support 400 pounds (approximate weight of sink when full and garbage disposal installed).
PAGE 3
2 SUPPORT FRAME Construct a support frame to fit inside the cabinet opening. Provide appropriate clearance for faucet, water supply lines, drain assembly, garbage disposal and structural parts of the cabinet. NOTE : In addition to supporting the sink vertically, fix the sink to prevent motion sideways and front-to-back. Flush Mount Installation Note: Install the support frame so that the top rim of the sink, when placed within the frame, will be level and flush with the top surface of the countertop.
PAGE 4
3 SINK INSTALLATION CAUTION: Sinks are extremely heavy. For personal safety, use extra person during installation. STEP 1. Carefully set the sink within the support frame and position in center of cabinet opening. Check clearance around sink apron and ensure sink is centered within cabinet opening. Ensure sink base is making proper contact with support frame and countertop. Adjust or shim, as needed, to obtain proper sink position and fit. STEP 2.
PAGE 5
4B Under Countertop Installation For under countertop installation, cutout opening is typically smaller than cabinet opening. The cutout size shall be determined by the preference of the customer. Carefully cut out the countertop opening. Opening must be adequately finished and sealed to prevent damage from water leaking.
PAGE 6
5B APPLY SEALANT For Under Countertop Sinks: Clean the sink apron and top rim of all debris. Ensure that the surface on underside of countertop cutout opening is smooth and free of debris. Under countertop installation requires a generous bead of sealant around the sink top rim where sink and countertop underside will make contact. APPLY SEALANT ON TOP THREE SIDES OF RIM TOP OF CABINET 6 INSTALL COUNTERTOP Carefully position and install the countertop.