Owner`s manual

INTRODUCTION
This manual explains the installation, operation and maintenance of the Water
Factory Systems’ FaucetMATE
®
Drinking Water Appliance. Please read each section of
this manual carefully. The specific model chosen should be appropriate for the local
water conditions and the customer’s needs. Check the Performance Data Sheet for the
performance characteristics and the conditions of use.
The Water Factory Systems’ drinking water appliances are designed to connect per-
manently to a home plumbing system. To ensure that the installation conforms to your
state and local plumbing codes, it is recommended that the installation be performed
by a qualified installation specialist for drinking water appliances or a licensed
plumber. Failure to install the system as instructed will VOID the warranty.
TABLE OF CONTENTS
I. Installation Instructions
A. Installation precautions....................................................................................................3
B. Determine system location ..............................................................................................3
C. Prepare the area for installation ......................................................................................3
D. Prepare the system for installation ..................................................................................3
E. Locating the faucet ..........................................................................................................3
F. Make the faucet mounting hole........................................................................................4
G. Mounting the faucet ........................................................................................................4
H. Mounting the drinking water filtration system ................................................................4
I. Installing the feed water valve..........................................................................................5
J. Make the tubing connections ..........................................................................................5
K. Installing and replacing filter cartridges ..........................................................................5
II. Illustrations
1. System location ..............................................................................................................6
2. Faucet installation ............................................................................................................6
3. Feed water valve installation ............................................................................................7
4. How to use “Push In connectors ....................................................................................7