Instruction manual

120-00004 REV A 10/6/2011 4000 DIGITAL MANUAL PAGE 18
(fig. 9)
Quick connect male elbow
This is a quick connect system comprised of the body, o-ring and
ferrule (fig. 9). Disconnect by pushing on the ring where the tubing
enters the fitting and gently pulling on the tubing. Re-attach by
inserting the tubing all the way in and then gently pull backward.
(fig. 10)
Barbed male elbow
The fitting uses a barbed connector system (fig. 10). Disconnect
by pulling on the tubing. Re-attach by pushing the tubing onto the
fitting until firmly seated.